Engine oil additive iMagnet P14 (HTHS stabilizer)

New
Engine oil additive iMagnet P14 (HTHS stabilizer)

Engine oil additive iMagnet P14 (HTHS stabilizer)

iMagnet P14- is the first HTHS viscosity engine oil stabilizer in the world.

iMagnet P14 has international novelty. This is the new age of engine oil additives. Application of only 5% of iMagnet P14 restores operational characteristics of modern oils and protects engine during all service interval. iMagnet P14 does not contain solid particles, it prolongs engine oil service life in conditions of low quality fuels and when oil producers saves on oil additives.

Advantages:

  • iMagnet P14 components optimize oil film and work as clever oil magnets in friction zones of engine, protecting it.
  • Comparable to chip tuning which aims to increase power and reduce fuel consumption
  • iMagnet P14 does not contain solid particles, which can damage details of modern engines

Packing: 85 ml

Code: 8302

About
Documents
Where to buy

It is the first oil additive for engine protection, which works with low viscosity, low SAPS and energy efficient engine oils, such as W-20, W-16, W30 A5 and others. The need of these engine oils is obvious and gives a lot of advantages – increase of acceleration, improvement of vehicle emission standards and in some cars-increasing of engine reliability thanks to design feature.

Do not confuse iMAGNET P14 with thickeners and oil viscosity stabilizers
Traditional viscosity stabilizers uncontrollably increase the viscosity of the engine oil, making the oil thicker. Due to this, there is a decrease in oil waste. But this only accelerates the agony of the motor, since the thicker oil worse enters the friction pairs.

iMAGNET P14 works in a completely different way: it evens out the HTHS viscosity of the oil with pinpoint accuracy to the value that the new oil had, while maintaining the required oil film thickness in friction pairs.

Most effective when working with modern energy-saving oils.
Does not contain solid particles.

But, even with all its exclusivity, these engine oils cannot serve during the long period- after only 3000 km these oils stop protect the engine from wear-as the result, your engine has short service life period. The lowest border of HTHS viscosity is the beginning of the wear:

HTHS is the engine oil viscosity at the temperature 150C and high share velocity; it is responsible for the thickness of “Oil Shield”, which protects the engine from wear. Sure, you just can change old oil on the new one, but it would not serve the problem, because, for example, use of low quality fuel, which anyway will penetrate into enough “fragile” already engine oil, even faster destroying it.

iMagnet P14 works as preventer, it prevents the rupture of thin oil film under the influence of negative factors, which appear during the engine work. Among these are dilutions by fuel, contamination with combustion products, local overheating (for example in the turbine), decrease of HTHS viscosity, and extreme conditions of engine running.

Only one bottle of iMagnet P14 restores all normal characteristics of modern engine oils, and powerful polymer complex as a part of iMagnet P14 improves antifriction properties of the engine oil in several times, makes the engine running more efficient and dynamic and allows you to enjoy the driving your car. Polymeric components of iMagnet P14 will create the film on the friction surface, reducing the friction coefficient, which is similar to slippery algae on stones in the sea.

Related articles

Find nearest distributor in your country: VMPAUTO distributors network.

Sergio, your manager at VMPAUTO

Request a quote now.