RESURS MOTO (4-stroke engine)

RESURS MOTO (4-stroke engine)

Packaging options:
50 g
Code: 4801
10 g
Code: 4802

For Engine recovery and wear protection of 4-stroke motorcycle engines (dry and wet clutch). The composition of the RESURS MOTO is adapted for motorcycle engines. This means it can be used with any type of clutch: dry or wet.

Indications for use:
1. oil burn;
2. uneven compression;
3. vibration and noise;
4. smoke; passing MOT exhaust test;
5. insufficient engine power.

 

WHERE TO BUY
About
Instruction
Documents
Where to buy

How does it work?

The active component, a nanopowder of an alloy of copper, tin, and silver, enters the friction zone, creating a cladding layer on the surface of the nodes. It is able to even out all micro defects and improves the performance of the parts of the cylinder-piston group and the bearings of the crankshaft.

Tests have shown that with “RESURS” wear is reduced by up to 4 times from the first seconds of engine operation. This effect can be clearly seen in the photographs – the wear spot with the addition of “RESURS” is much smaller.

Under the influence of temperature and pressure, the particles are activated and begin to restore the surface, reacting primarily to damage to the metal. Unlike the preparations of previous generations, “RESURS” forms a porous structure, which, like a sponge, retains oil and keeps it in the friction zone, reliably protecting parts from wear during cold start, engine overheating, sudden acceleration, and deceleration.

APPLICATION:

  1. It’s better to change the engine oil and filter.
  2. Warm up the engine and turn it off;
  3. Shake the bottle for 20-30 sec;
  4. Pour RESURS into the engine oil system;
  5. Run engine at idle for 10-15 min;

DOSAGE:

Prevention: one bottle for 3-4l of oil;
Restoration: two bottle for 3-4l of oil.

Find nearest distributor in your country: VMPAUTO distributors network.

Our products in web shops

Sergio, your manager at VMPAUTO
Order samples