How to do an internal engine “Detailing”?
«Cleanliness makes it easier to see the details. »
We’re glad to present you a new product based on the deep engine decarbonization and internal “detailing”. The technology of decarbonization brings the engine parameters close to the factory ones. This is the fundamental difference between our product and conventional flushes.
Application:
1. Change the oil and the filter.
2. Pour the first five liters of special flushing oil into the engine.
3. Run the engine for 15 minutes at 2,000 rpm.
4. Drain used oil and change the filter.
5. Pour the second part of flushing oil into the engine.
6. Run the engine for 15 minutes.
7. Drain used oil and change the filter.
8. Pour the third part of flushing oil into the engine.
9. Drain used oil and check its transparency. If it’s satisfactory, pour the ordinary engine oil in.
The secret of success is based on adding 3% of the innovative decarbonizing agent in simple oil to make a high-effective flushing oil. This process gives the possibility to renew and prolong the engine life.
This component is produced and distributed by VMPAUTO Russia, Saint Petersburg.
